Analytical Instruments
Determines the concentration of fluorophores Quinine. Sensitivity adjustable in 4 ranges. 3 Digit bright red seven segment LED display. Supplied with Primary and secondary Filters (Set of 5 filters). Excitation source - 12V, 50W tungsten halogen lamp. Works on 230V, ±10% AC, 50Hz.
Perfect for mixing blood samples, viscous substances and solid - liquid suspensions. Rocking & Rolling action ensures optimum mixing. The mixer can be placed inside the Incubators and Cold Rooms. A must have instrument for Pathological Laboratories. Works on 220V ±10% AC.
3.5 Digit Red LED Display. One touch calibration. Automatic Temperature Compensation & auto buffer recognition. Supplied with Combination pH Electrode, RTD Probe, Electrode Stand, Buffer Tablets (7, 4 & 9 ph), Sample Bottles (3 Pieces) & Instruction Manual. Works on 220V ±10% AC.
3.5 Digit LED display. Output available in %Transmission (%T), Absorbance (Abs.), Concentration (Conc.) and K Factor. Wavelength: 400-700 nm. Auto Zeroing Facility. 1ml solution measurement. Supplied with Glass Sample Tubes (5 Pieces), dust cover & operation manual. Works on 220V ±10% AC.
4Digit LED Display, Fitted with Grating 1200 lines/mm optical system with the spectral bandwidth of 2 nm. RS232C communication support. Supplied with 2 Glass Cuvettes of 10mm pathlength, Operation Manual & Dust Cover. Works on 220V ±10% AC.
3½ Digit LED Display for Data & Separate 3 Digit LED Display for Wavelength. 1nm wavelength resolution, facility for automatic concentration, % Transmission and absorbance measurements. Supplied with 2 Glass Cuvettes of 10mm pathlength, Operation Manual & Dust Cover. Works on 220V ±10% AC.
Capacity - 10 gm.
Pan Size - Ø 100 mm
Robust all metal construction.
Works on 220V ±10% AC.
16 x 2 Line backlit LCD Display, Temperature setting range from 30˚C to 80˚C. Programmable timer setting from 0 to 250 minutes. Block Dimensions: 100mm x 75mm. 24 slots of 12mm Dia. x 30mm Depth. Supplied with Power Cable & Operation Manual. Works on 220V ±10% AC.
5 Digit 7-Segments Bright Red LED Display. With Na & K Filters. Ca, Li & Ba can be supplied on extra cost. 3 point calibration. Burner made of Stainless steel. Auto Ignition and gas cut-off System. 5 different element measurements in single aspiration of the sample. Auto flame failure detection system. Inbuit memory for storing sample data. Soft touch membrane keys. Sensitivity of 0.5 ppm. Supplied with Oil Free compressor unit fitted with pressure regulator, Na and k filters, Sample Holders, air and gas tubing along with end clamps, chimney, capillary tubes, cleaning wires, Dust Cover and Operation Manual. Works on 220V ±10% AC.Can be supplied with in-built thermal printer at extra cost.
Dual 2½ Digit Red LED Display, Range Na: 0-200meq/l, k: 0-10 meq/l, k: 0-100 meq/l [optional], Ca: 0-10 meq/l [optional], li: 0-2 meq/l [optional]. Measures two elements at a time. Dual Channel For Simultaneous Observation of Na & K with Single Aspiration. Supplied with Oil Free compressor unit fitted with pressure regulator, Na and k filters, Sample Holders, air and gas tubing along with end clamps, chimney, capillary tubes, cleaning wires, Dust Cover and Operation Manual. Works on 220V ±10% AC.
Dual 2½ Digit Red LED Display, Range Na: 0-200meq/l, k: 0-10 meq/l, k: 0-100 meq/l [optional], Ca: 0-10 meq/l [optional], li: 0-2 meq/l [optional]. Measures one element at a time. Supplied with Oil Free compressor unit fitted with pressure regulator, Na and k filters, Sample Holders, air and gas tubing along with end clamps, chimney, capillary tubes, cleaning wires, Dust Cover and Operation Manual. Works on 220V ±10% AC.
Array of 10 LED’s in line shows the level of titration. Fitted with in-built stirrer. Supplied with auto zero glass burette – 10ml, Reservoir Bottle – 500ml, Rubber Below for pumping air, Teflon coated magnetic stirring capsule, nozzle, moisture trap with rubber tubing, dual platinum electrode & operation manual. Works on 220V ±10% AC.
16 x 2 lines Backlit LCD display.
Motorized dispensing of KF Reagent (No Glass Burette)
Digital Display of KF consumed with readability of 0.01ml
Easy calibration of dispensing pump by front panel keys.
Memory for recording K F used.
Inbuilt magnetic Stirrer with variable speed control.
Programmable Delay Time with Buzzer.
Motorized reagent washing from tubing after analysis.
Works on 220V ±10% AC.
Supplied with Dual Platinum sensor, Reagent bottles with adopters, Titration bottle, Magnetic rotor, Set of Dispensing tubes,
set of connecting tube and operation manual.
Printer attachment facility available at extra cost.