|
 |
| |
OSCILLOSCOPE |
Features
 |
Dual channe/Dual tracing, X-Y mode |
|
Six inch display cathode ray tube, Sensitivity triggering up to 1mV/division |
| TV synchronous separation circuit to observe stable TV signal |
| X-x10/Y-x5 |
| Polarity reversal, CH 1sync output |
| HIC 6015-A |
20MHz |
| HIC 6015-B |
30Mhz |
|
|
 |
HIC 6016
|
OSCILLOSCOPE |
| |
30MHz with six digits 30MHz frequency counter |
| Features |
Dual channe/Dual tracing, X-Y mode |
|
Six inch display cathode ray tube |
| CH 1 x 10 magnification, sensitivity triggering, up to 1Mv/division |
| TV synchronous separation circuit to observe stable TV signal |
| X-x10/Y-x5 |
| Polarity reversal, CH 1sync output |
|
|
 |
HIC 6017
|
OSCILLOSCOPE |
| |
DC 60MHz |
| Features |
Dual channe/Dual tracing, X-Y mode |
|
Six inch display high brightness cathode ray tube with scale illumination control |
| Sensitivity triggering, up to 1Mv/division |
| CH 1 channel incremental amplification function for clearer display |
| TV synchronous separation circuit to observe stable TV signal |
| X-x10/Y-x5 |
| Polarity reversal, CH 1sync output |
|
|
 |
HIC 6018
|
OSCILLOSCOPE |
| |
DC-60MHz with CRT readout |
| Features |
Three channel/six traces with delayed scanning |
|
CRT digital cursor readout, HOLD OFF function |
| CH1: Maximum 400V input voltage |
| Scan speed up to 50ns/division |
| 6” display cathode ray tube |
| High sensitivity triggering, up to1mV/division |
| X-x10/Y-x5 |
| Polarity reversal |
|
  |
|
